Teclast Taipower T100UC-G (10000mAh/QC3.0) Bidirectional Fast Charge Mobile Power Supply

Purchase process

After buying this mobile power, it was a bit tortuous.

The reason to start is to buy a QC3.0 mobile phone, the previous mobile power only 5V2A output, so I think into a support for QC3.0, support for two-way fast charge, it is best to support digital display mobile power.

On May 25th, JD.com was found to have launched a “Mobile Accessories Festival” and saw that there was just a mobile power supply. The mobile power supply was a RMB 1 deposit for XX Yuan. After June 1st, you can pay for the purchase price. .

There are not many mobile power models to participate in the event. It seems that there are less than 10 models (the page cannot be found now). There are not many options, mainly millet and purple rice. This Taipower's T100UC-G was in active products at the time, priced at 149 yuan, 1 yuan deposit arrived at 61 yuan, such as June 1st after the start of the payment of 88 yuan, a total of 89 can be purchased, if you do not buy, 1 yuan deposit Not refundable. Because my friends and colleagues use millet to move power too much, and 10 of them have 8 millets, and I think of buying a different one. In participating in mobile power, I think the value of Taipower is good. , And the other either does not support digital display, or does not support two-way fast charge, to meet all my requirements, only this one. Adding an MP3 that had been bought by Taipower in the previous MP3 era, it wasn't bad at all. It didn't have any bad impression on this brand, so it paid the deposit.

However, at 0:00 on June 1st, I went to Jingdong to see that Jingdong actually turned my scheduled product into a 20,000-millimeter piece of millet without authorization. It was also priced at 149, but the deposit was only $1. , need to pay the end of 128 yuan.

Then Taipower’s mobile power disappeared from the event page and became another one that does not support two-way fast charging. Then I found out that this T100UC-G became a direct purchase of 89 yuan.

Then I bought it for $89 directly. The second day, the Jingdong customer service phone complaints, customer service said that from the background can only see I was the original order is Xiaomi, can not see that I order is Taipower that section, but you can use Beijing bean way to return 1 yuan deposit to me. I have considered that there is no loss. Second, I still bought it for 89 yuan. I agree. If this power is still priced at 149, then I must be jealous of Jingdong.

As I wrote this article, I found that the price of this mobile power has been adjusted to 99 yuan.

Taipower T100UC-G bidirectional fast charge compatible QC3.0 all-metal ultra-thin polymer batteries 10000 mAh charge treasure / mobile power support Type-c and MicroUSB dual input black gold 99 yuan Jingdong direct link

The purchase process ends.

Unpacking experience

Not much to say about the box, I do not like to see some of the original, light box on the ten photos of eight photos, little significance, one or two enough.

In addition to the power supply body, all accessories on a USB2.0 charging cable, the line is rather thick.

The shell is metal, the surface of which seems to be called sandblasting process? Only a Taipower LOGO on the shell, the overall comparison is simple.

The gold part of the shell is also metal, the same process.

The power button is on the side of the gold casing.

Interface panel, Micro-USB and Type-C dual-port input, two ports arranged a bit misaligned, Virgo may be unbearable? I will also be able to endure it. There is only one output port, and the red digital display shows 85% of the power for the new power supply.

The bottom of the parameters, 37Wh, take the plane naturally no problem. Why buy 10000mAh does not buy 20,000mAh, because for me personally, the situation that can not find the place to charge for a long time is very few, mobile power can charge a 1-2 callback emergency enough, it is enough to satisfy my 99.99% use demand, The 10000 mAh is relatively balanced in terms of capacity and volume weight, and 20000 mAh is too large and heavy.

Next to the previous insurance on the car, insurance salesman sent a Sinonova 10000mAh mobile power, 18650 batteries, does not support two-way fast charge. Both are quite long, and Taipower is a bit wider.

In the thickness control, the use of polymer batteries is obviously superior to the 18650 batteries.

Taipower weighs 237g, the manufacturer nominal 240g, count the same. Sinor's 280g, the gap between the two 43g is about the same as an egg.

Compared with the 5.5-inch mobile phone, it's a little bit smaller.

Use simple test

Test with a USB test meter, the voltage and current are floating, and the value is relative to the middle one. The conditions are restricted and the error is inevitable. The result is for reference only.

The official nominal input parameters: 5V/2A (10W), 9V/1.5A (13.5W).

With 18W charging head of nut Pro, connect Type-C port to charge mobile power, 9.06V/1.78A, is about 16W, the voltage is basically stable at 9V, the current is between 1.6A-1.83A, even slightly higher than the official parameters a little.

Switch to Micro-USB input, 9.03V/1.69A, which is slightly higher than the official parameters.

Huawei's 5V/2A charger, Micro-USB input, 4.97V/1.9A, also meets the official parameters, slightly lower but within a reasonable error.

After reading the input to see the output, the official output parameters: 5V/2.1A, 9V/1.7A, 12V/1.3A, ordinary output power 10W, fast charging output power of about 15W.

Let's look at the nut Pro with the original charger, 6.19V/2.99A, slightly floating, but it can reach 18W without doubt. This charging voltage and current is not a common combination of 9V/2A or 12V/1.5A. This is the characteristic of QC3.0. The voltage is not a fixed 9V, 12V, but can be between 3.6V-20V. Take 200mV as a change.

Taipower T100UC-G was used to charge the nut Pro, 5.11V/3A, and 15W was not defective.

Let's look at using Huawei's original 5V/2A charger to charge Mate7, 5V/1.46A, 7.3W, do not know what the current is low, re-insert each interface several times, or over 1.5A, previously measured current energy To 1.7A-1.8A.

Look again and again to charge Mate7 with Taipower T100UC-G, 5.05V/1.62A, 8.1W or so, instead of using the original charging head higher, strange.

To summarize a table, it can be said that the input and output of this Taipower T100UC-G mobile power supply meets the official nominal parameters and meets the QC3.0 standard.

In summary

Advantages: good value, metal shell, support bi-directional fast charge, output support QC3.0, Micro-USB, Type-C dual-port input.

Disadvantages: It seems that mobile power is such a simple thing, as long as it is a regular brand of things, it seems that it is not easy to find out what a big drawback, the two input ports may not be aligned, only a single port output can be counted as one.

Within 100 yuan at the same time to meet the support of two-way fast charge, support for QC3.0 and digital display seems not much, at least in Jingdong, I simply looked at, only to find a Roman official DP10, sell 99 yuan, other or a few No quick charge, no fast charge, no digital display, or just QC2.0. To start with the price of 89 yuan, the price is still OK, and now selling 99 down is also flat with friends.


USB Data Charging Cable For Iphone

Usb Data Charging Cable For Iphone,Auto Rolling Retractable Usb Cable,High Speed Apple Usb Cable,Fast Apple Charger Cable

Dongguan Pinji Electronic Technology Limited , https://www.iquaxusb4cable.com

Posted on