First, the tender conditions:
Under the entrustment of Shanxi Guoxin and Shengxin Energy Co., Ltd., the domestic iso-octane oil and gas recovery complete equipment procurement organization for the 200,000-ton/year deep-carbon 4 deep-processing construction project was openly invited domestically and the funding source was self-raised.
Second, the tender number and tender content:
1) The tender number: JCZB02-HW20161229
2) Bidding content: Gasoline oil and gas recovery complete sets of equipment, 1 set, recovery method: condensation + adsorption.
Specific technical requirements are detailed in the tender documents.
Third, bidder qualification requirements:
1) A bidder company or other organization registered with the bidder within the territory of the People's Republic of China and having a valid business license shall have the ability to design, manufacture, and supply tendered goods.
2) Not included in the dishonest executor.
3) The unit responsible for the same person or different units that have a controlling or management relationship may not participate in the bidding for this project at the same time.
4) This tender does not accept the agent's bid.
5) The Commonwealth does not accept bids in this tender.
Fourth, bid registration:
1) All interested bidders are invited to participate in the bid from December 30, 2016 to January 6, 2017 (8:00 am to 12:00 am, 2:00 pm to 6:00 pm, excluding official holidays).
D-sub Connector Contacts
D-sub Connector Contacts
A D-sub connector is a form of connector commonly found in electronic and computer systems. It consists of a D shaped metal band and two or more parallel rows of either pin contacts (male) or socket contacts (female). D-sub connector contacts can vary in size, material, current rating, length and resistance.
The most common type of connector is the crimp contact. These are assembled by inserting a stripped wire end into the cavity at the rear of the contact. The cavity is then crushed using a crimp tool, gripping the contact to the wire.
What are D-sub connector contacts used for?
The D-sub connector contacts carry the signal from the source to the destination across the D–sub connection.
Types of D-sub connector contacts
Most D-sub connectors are supplied with contacts ready in place. Contacts can be replaced if damaged or if the application of the D-sub connector is to be changed from the original design specification.
High-current, high-voltage, or co-axial inserts require larger contacts. The material of the D-sub connector contact can be changed if the robustness or quality of the connection needs to be improved.
D-SUB coaxial contact,D-Sub Connectors Contacts,D-Sub Plug Connectors Contact,D-Sub Receptacle Connectors Contact
ShenZhen Antenk Electronics Co,Ltd , https://www.antenk.com