Xu Shaozhong, CEO of the South Branch of the Taiwan Industrial Research Institute, said that ceramic materials have the advantages of low thermal expansion coefficient, high humidity resistance, insulation, high thermal conductivity, high hardness and wear resistance. In recent years, they have been widely used in light-emitting diode (LED) light sources. Module and integrated circuit board (IC) high power cooling module.
The existing precision ceramics are non-metallic hard and brittle materials, using traditional mechanical drilling, which has the difficulty of large holes and easy to be broken. The current industry adopts ultraviolet nanosecond laser, but it has the problem of high price and slow processing speed.
Xu Shaozhong pointed out that the optical architecture patent can be used for continuous processing of laser pulses and picoseconds (10 minus 12ths of a second) pulses in nanoseconds (10 negative 9ths of a second) and applied to the micro-drilling process of LED ceramic heat sinks. The aperture size is less than 100 micrometers, the processing speed is 4 times faster than the current ultraviolet nanosecond laser, and there is no cleavage phenomenon, and the speed is fast, the hole is small, the quality is excellent, and the cost is only ultraviolet light nanosecond laser 2/3 It has been tested in the LED packaging factory in Taiwan and will help improve LED production efficiency and quality.
Xu Shaozhong said that laser source related technology can also be applied to color laser engraving, with nanometer laser and chrome oxide on the surface of stainless steel. Through different laser power and time parameters, dozens of colorful colors can be presented. The color and color are full and long-lasting, which has led to a company to invest in laser engraving and creation.
In addition, the related technology is also applied to laser printing, which is 50% to 100% faster than international manufacturers. The technology has been transferred to the company and successfully imported into the memory module production line.
Coreless Motor product introduction:
Coreless Motor, small size, light weight (cylinder) - radial rotation/weeks to rotation (flat) - low noise, low power consumption, strong sense of vibration - simple structure - reliability - response time short Micro Vibration Motor is mainly used in mobile phones, toys, adult health supplies, etc
Function: fast speed, suitable for aircraft model, electric toothbrush,USB fan and other products.
Characteristic: the volume is 6MM 7MM fast.
Features: small size, fast speed, dc high speed motor starting voltage 0.6v is not possible for other motors.Wear shaking head, strong vibration feeling.
Operating temperature range:
Coreless Motor should be used at a temperature of -10~60℃.
The figures stated in the catalog specifications are based on use at ordinary room temperature catalog specifications re based on use at ordinary room temperature (approximately20~25℃.
If a Coreless Motor is used outside the prescribed temperature range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.Depending on the temperature conditions ,it may be possible to deal with them by changing the grease of the motor's parts.Please feel free to consult with us about this.
Storage temperature range:
Coreless Motor should be stored ta a temperature of -15~65℃.
In case of storage outside this range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.
Service life:
The longevity of Coreless Motor is greatly affected by the load conditions , the mode of operation,the environment of use ,etc.Therefore,it is necessary to check the conditions under which the product will actually be used .The following conditions will have a negative effect on longevity.Please consult with us should any of them apply.â—Use with a load that exceeds the rated torque
â—Frequent starting
â—Momentary reversals of turning direction
â—Impact loads
â—Long-term continuous operation
â—Forced turning using the output shaft
â—Use in which the permitted overhang load or the permitted thrust load is exceeded
â—A pulse drive ,e.g.,a short break,counter electromotive force,PWM control
â—Use of a voltage that is nonstandard as regards the rated voltage
â—Use outside the prescribed temperature or relative-humidity range,or in a special environment.
â—Please consult with us about these or any other conditions of use that may apply,so that we can be sure that you select the most appropriate model.
when it come to volume production,we're a major player as well .each month,we rurn out 600000 units,all of which are compliant with the rohs directive.Have any questions or special needed, please contact us, we have the engineer group and best sales department to service to you Looking forward to your inquiry. Welcome to our factory.
Coreless Motor,Micro Coreless Motor,7Mm Coreless Motor,Micro 6Mm Coreless Motor
Shenzhen Shunchang Motor Co., LTD. , https://www.scgearmotor.com