(Mites new product) sample special slicer manual - Huaqiang Electronic Network

Test - lowercase jpg

Kaixin micro test

Manufacturers produce direct sales LED lamp bead patch lighting products 0805 white light super bright indicator light dedicated

Test probe P100-M3

First, the sample specific slicer technical parameters:

1. Sample slicer minimum slice thickness: 0.1-0.4mm

2, sample size: 50 × 50 × 100mm

3. Dimensions: 155×120×120mm

4, effective stroke: 25mm

5, the overall weight: 7.5KG

The function of the sample placement regulator is to place the sample and adjust the thickness of the sample slice. The main structure includes a sample placement groove, a sample slice thickness adjuster, and a sample tightening screw. The structure is as follows:

Second, the use of:

1. Adjust the thickness adjuster of the test piece to the 25mm mark, loosen the sample clamping screw, place the sample of size 50×50mm into the mounting groove, and tighten the sample clamping screw to press the sample.

2. Use a slicing knife to cut the excess sample along the surface of the cutter platform. To ensure that the upper part of the sample is flat, use a slice thickness adjuster to adjust 0.3 mm, and use a slicing knife to trim the sample.

3. The thickness of the slice is adjusted to the required thickness (clockwise for the extruded sample, counterclockwise for the sample to be returned to the sample placement slot) and sliced ​​with a slicing knife.