1. First investigate, then familiar, first analyze where the problem may appear, and then do it.
2. After cleaning and maintenance, the practice shows that many faults are caused by dirt, have been cleaned, and the faults will automatically disappear.
3. In the first machine outside the machine, first check the computer's external power supply, equipment, wiring, and then boot again.
4. Start with the software and start with the hardware. Start with the software and start with the hardware.
5. First mechanical and electrical, clear whether it is caused by mechanical reasons or caused by electrical problems
6. After the power supply, many faults are often caused by poor contact or no plugging.
7. Special after the first illness, first eliminate common faults with universality and regularity, and then check for special faults.
8. After the peripheral and internal, the peripheral circuit should be checked. When confirming that the peripheral circuit is normal, consider replacing the important components.
It is best to draw a hard disk partition for the installation of these software, only one software is installed for testing at a time, to avoid problems when it is unclear which new installation software has a problem, if possible, install two separate partitions in the hard disk One system is commonly used, and one is a backup system. When the party's common system is not working properly, the backup system can also be used.
Vapesoul Vape,Disposable Vape Review,Hqd Maxx Hqd Cuvie Plus,12 Fruit Flavors Disposable Vaporizer
tsvape , https://www.tsvaping.com