TCL LCD TV black screen with sound and no sound repair



We have always said that the black screen is actually divided into categories, one is a black screen without sound, and the other is a black screen with sound. In fact, the solution to these two kinds of failures is not the same, you must be clear what kind of situation is your LCD TV black screen, in order to better solve the problem. Today, Xiao Bian took the TCL LCD TV as an example, to give everyone a glimpse of the black screen phenomenon of several models.

Model: LCD47K73


Symptom: There is no image with sound


Analysis and overhaul: Turn on the power and the screen will be dark. Disassemble the machine, measure the working voltage of the backlight board, and the switching voltage is normal. This phenomenon is generally a problem with the backlight board. After applying for the replacement of the backlight board, the machine is normal.



Model: LCD1526A


Symptoms: There is no sound


Analysis and maintenance: boot image is normal, no sound, check the sound system is set to DK state, measurement U8, U19 working voltage is normal, the bus voltage and waveform are normal, suspect U7 data problems, U7 after the test sound map is normal.

Model:LCD40B66-P


Symptom: There is no image with sound (dark light)


Analysis and Maintenance: Turned on for a while, there is no sound, but there are dark lights, there is light that the backlight board is good, doubt the motherboard and the central control board problems, test screen working conditions, the voltage of each foot is normal, so Change center control board, troubleshooting.



Model:LCD20A71

Fault phenomenon: black screen


Analysis and Maintenance: Booting sound with no image The black screen backlight can be lit without the screen display, and the detection power supply is all normal. With an oscilloscope, the TFT has a signal output, which proves that the screen may be broken. After the screen is opened, it is found that the screen power supply insurance F501 is bad, and the fault is eliminated after being short-circuited.





Model: LCD26B66 (GN21 Series)


Symptom: No image on black screen


Analysis and Maintenance: After power-on, no image was found, press the menu button to search for the station, but the remote control was found to have no effect. Suspected memory IC problems, re-copy software, found that the fault remains the same, and then re-copy FLASH after the fault is the same, and finally found that every time you boot, there will be a Nike symbol at the station logo, the analysis may be a problem with the Nisin version, Finally, it was found that the L504 IC's L504 circuit was open and the fault was eliminated after replacement. A few black screens appear on several models.


Tags: Smart TV Forum, Smart TV Communication


3D Display

ALLIN , https://www.nbdisplayapio.com

Posted on