Analysts believe that the recent multi-benefit in the LED concept, under the guidance of relevant policies, this year is expected to become a turning point in the LED concept.
First of all, the recent Development and Reform Commission announced the "Semiconductor Lighting Energy Conservation Industry Plan" to guide the development of China's LED lighting energy-saving industry in the near future. According to the plan, by 2015, all incandescent lamps for general lighting above 60W will be eliminated, and the market share of traditional high-efficiency lighting products such as energy-saving lamps will be stable at around 70%.
Secondly, it is reported that China's gradual reduction of the mercury-containing roadmap for fluorescent lamps has been officially released. The Roadmap proposes the goal of a complete phase-out of the liquid mercury production process by the end of 2014. The industry believes that with the elimination of backward production capacity, leading enterprises with advanced production capacity will have more room for development. At the same time, by the end of 2013, we will strive to eliminate the production process of compact fluorescent liquid mercury. By the end of 2014, we will strive to eliminate the liquid mercury production process.
The data shows that in 2011, China's fluorescent lamp production was about 7 billion, accounting for more than 80% of global production. Among them, the output of compact fluorescent lamps is about 4.7 billion, and exports are 2.8 billion; the output of other types of fluorescent lamps is about 2.3 billion, and the output is 770 million. According to the industry standard “Limited Requirements for Toxic and Hazardous Substances in Lighting Electrical Products†issued in 2008, compact fluorescent lamps contain up to 5 mg of mercury, and straight tube fluorescent lamps contain up to 10 mg of mercury. It consumes tens of tons of mercury.
Benefiting from a series of industrial support policies, the industry is generally optimistic about the Chinese LED lighting market. According to statistics, from 2009 to 2013, the compound growth rate of the market scale reached 43.58%. It is expected that by 2013, the scale of China's LED lighting market is expected to reach 73 billion yuan. Residential is the largest application market for global lighting, and home lighting is also indispensable for consumers. LED lighting quickly cuts into the residential lighting market and replaces traditional light bulbs. However, due to the high sensitivity of consumers to prices, the penetration rate of LED lighting in the residential lighting market in 2012 is about 13%, which needs to be improved.
The industry believes that after the integration and price adjustment of the previous two years, the LED industry is more healthy and stable from the perspective of market order and competition. This year will be an ideal opportunity for the rapid development of LED. As the production capacity caused by over-investment in the previous two years has gradually eased and shifted to the middle reaches, the bargaining power of upstream chips and downstream terminal products will be strengthened.
Plastic Insulated Control Cable
1. Product standard
This product is manufactured according to GB9330 and enterprise standards.
2. Application
For system connection wire of control, signal, protection or measuring with rated voltage up to and including 450/750KV,like signal cable,concentric cable.
3. Operating characteristics
Rated voltages U0/U: 450/750V
Permissible Max. continuous operating temperature of conductor:
PVC insulated: 70℃;XLPE insulated: 90℃.
Upon short circuit (Max. Duration time 5s) the Max.
temperature of conductor not higher than:
PVC insulated: 160℃; XLPE insulated 250℃.
Ambient temperature of installation not less than 0℃.
Preferred permissible bending radium:
For non-armored cable, not less than 6 times of cable diameter;
For armored or copper-tape-screened cable, not less than 12 times of cable diameter;
For screened flexible cable, not less than 6 times of cable diameter.
4. Type, designation and application:
Type: KVV/KYJV, KVVP/KYJVP, KVVP2/KYJVP2, KVV22/KYJV22, KVV32/KYJV32, KVVR/KYJVR, KVVRP/KYJVRP
Designation:
KVV/KYJV: Copper conductor PVC/XLPE insulated PVC sheathed Control Cable
KVVP/KYJVP: Copper conductor XLPE/PVC insulated PVC sheathed braid screened control cable
KVVP2/KYJVP2: Copper conductor PVC/XLPE insulated PVC sheathed copper tape screened control cable
KVV22/KYJV22: Copper conductor PVC/XLPE insulated PVC sheathed steel tape armored control cable
KVV32/KYJV32: Copper conductor PVC/XLPE insulated PVC sheathed fine steel wire armored control cable
KVVR/KYJVR: Copper conductor PVC/XLPE insulated PVC sheathed control flexible cable
KVVRP/KYJVRP: Copper conductor PVC/XLPE insulated PVC sheathed braid screened control flexible cable
Main application:
KVV/KYJV: For fixed-laying indoors, in cable duct or conduit
KVVP/KYJVP: For fixed-laying indoors, in cable duct or conduit upon screen requirement
KVVP2/KYJVP2: For fixed-laying indoors, in cable duct or conduit upon screen requirement
KVV22/KYJV22: For fixed-laying indoors, in cable duct direct-buried, able to bear larger mechanical forces
KVV32/KYJV32: For fixed-laying indoors, in cable duct, conduit or well, able to bear larger mechanical forces
KVVR/KYJVR: For laying indoors upon moveable requirement
KVVRP/KYJVRP: For laying indoors upon moveable and screen requirement
Control Cable
XLPE Control Cable,Insulated Control Cable,Outer Sheath Control Cable,PVC Flexible Control Cable
Huayuan Gaoke Cable Co.,Ltd. , https://www.bjhygkcable.com