High energy and low power wireless AMR design

Automatic meter reading, or AMR, is a technology that automatically collects consumption, diagnostics, and status data from water meters or energy meter devices (gas meters, electricity meters, etc.) and transmits the data to a central database for billing, troubleshooting, and analysis. . This solution uses a high-performance low-power 8051 microcontroller core, which is a wireless AMR design. The receiver in the solution has excellent sensitivity and strong anti-interference ability.

The high-performance, low-power 2.4GHz modular reference solution in this design uses the AES-128's secure coprocessor.

High energy and low power wireless AMR design

Main characteristics

High performance low power 8051 microcontroller core

IEEE 802.15.4 compliant 2.4-GHz RF transceiver

Excellent sensitivity of the receiver and strong anti-interference ability

Programmable output power up to 20 dBm

AES Security Coprocessor

Wide supply voltage range, 2.0 – 3.6 V *

32-, 64-128-, or 256K on-chip programmable Flash and 8K RAM

High sensitivity (–98.8 dBm)

21 general purpose I/O pins

Low current consumption (RX: 27 mA, TX: 166mA)

typical application

2.4-GHz IEEE 802.15.4 system

RF4CE remote control system (64-KB Flash)

ZigBee system (256-KB Flash)

Home and building automation

Lighting system

Industrial monitoring

Low-power wireless sensor network

Consumer Electronics

medical insurance

block diagram

High energy and low power wireless AMR design

parameter list

High energy and low power wireless AMR design

Customized Mono Solar Panel

Solar Panel

Mono Solar Panel
Anti-reflective coating: AR used reduces the reflectivity to enhance transmittance.
Tempered Glass: Low Iron and AR coating glass increase the power output and mechanical strength of the solar module. Mechanical load ≥2400Pa, transmittance ≥91.6%
EVA: Transmittance ≥91%, Adhesive Capacity >85%
Cell: 17.9% of high-efficiency solar cells to sure 15.7% module efficiency
Back sheet: Using higher quality back sheet to prevent destroying and water, it`s reflectivity ≥87%, peeling strength ≥ 40N/cm.
Aluminum Frame: Anodized aluminum alloy to effectively improve the corrosion resistance and strength

Mono Cell Solar Panel,Monocrystalline Module,Perc Mono Solar Panel,Monocrystalline Solar Panel Price

Wuxi Sunket New Energy Technology Co.,Ltd , https://www.sunketsolar.com

Posted on