What is it? Does your home hood have a "delay" function?

Many consumers nowadays have more and more home appliances. In fact, they don't really use much. Take the range hood, the general range hood has air volume adjustment, lighting and delay functions, and the other two. Very familiar, then what is the use of this delay function? Really just like the consumer understands

UL Metal Case Wide Voltage Led Driver

It is specially used in the US market, over UL certification, steel shell packaging, high safety performance, for panel lights, troffer indoor use, conventional products, stable quality, high PF value, 100-277 input, to avoid in high temperature and humid environment use.

Questions about flicker-free light may arise at this point. To be fair, it should be pointed out that fluorescent tubes operated with conventional or low loss ballast also flicker at 100 Hz and the light output is reduced at lower ambient temperatures. Fluorescent lamps operated with an ECG, including energy saving lamps, work at 44 – 50 kHz so that the lamps normally do not flicker. In reality, however, things are a little different. While a higher switching frequency is used, the input capacitors are to small for cost reasons. This causes the high frequency circuit in the lamp to be supplied with a strongly pulsating voltage. This pulsation creates a brightness modulation in the emitted light which is why these lamps often have a rather high level of flicker at 100 Hz.

UL Metal Case Wide Voltage Led Driver

Led Driver 50-70V,Constant Current Led Driver Pf,Driver For Led Panel Lights

ShenZhen Fahold Electronic Limited , http://www.fahold.com