The US Federal Trade Commission recently issued a new electric light source labeling requirement, which requires new labels to be placed on the electric light source packaging sold in the United States since June 2011. Electric light sources that do not meet the new label requirements will not be allowed in the United States. Sales.
According to the requirements of the regulations, the new label will replace the original single mode of distinguishing various types of electric light sources by power. It requires increasing luminous flux, annual energy consumption cost, average life, color temperature, mercury content, energy source efficiency and toxic and harmful substances. Relevant information.
The content of the new label will enable consumers to clearly identify the energy saving and environmental protection levels of different electric light sources. While encouraging the use of energy-efficient products such as self-ballasted fluorescent lamps and LED lamps, the low-efficiency electric light source products such as incandescent bulbs will eventually be withdrawn. American city
It is understood that the electric light source products involved in the label requirements are key commodities exported from Ningbo. Taking Ningbo Yinzhou District as an example, from January to November last year, a total of 1167 batches of electric light source products were exported, which was US$37.612 million, an increase of 18.0 over the same period of the previous year. % and 25.8%. Therefore, the promulgation of the new labeling regulations in the United States has a greater impact on exporting enterprises. Inspection and quarantine personnel have learned from large enterprises such as Global Optoelectronics that more and more customers require production enterprises to provide energy-saving products. These large enterprises rely on their own technical guarantees. Earlier establishment of product energy efficiency control system, from the source should actively regulate this label. For a large number of small and medium-sized enterprises, the new label regulations will bring severe tests. For these enterprises, it is not difficult for the relevant products to meet the requirements of the US energy-saving standards. The key is that the enterprises themselves understand the domestic and international trends as early as possible. Pay close attention to the briefings. The inspection and quarantine department reminds enterprises to collect information from various sources, improve energy efficiency awareness, and actively cooperate with inspection and quarantine departments to jointly break through foreign technical barriers.
Stator and rotor laminations are an important part of motors and generators. The stator and rotor laminations are made of electrical steel by cutting and stamping. Usually the laminations are circular, and for those large motors or generators, the laminations are fan-shaped. Usually the thickness of the stator and rotor laminations is 0.2mm, 0.35mm, 0.5mm, 0.65mm, but depending on the application, there are thinner or thicker laminations. We are able to produce motors of various sizes from 100mm to 1250mm outer diameter. For larger motors or generators, we can also produce stator segment laminations.
Customizable Stator laminations,Customizable Rotor laminations,Segmented Stator laminations,Premanent Magent Rotor Lamination
Henan Yongrong Power Co., Ltd , https://www.hnyongrongglobal.com