In the era of Internet popularity, many households have a variety of Internet devices, but usually only one broadband home, so at this time we will use a network device switch, use it to achieve our computer or many mobile devices Internet access provides more convenience. The following is a way to connect the switch using the tutorials, which will help you.
How to connect to the switch:This kind of small switch used in my home, only a few interfaces, home is enough, and other switch settings are the same as this, first look at the picture as shown below: the back is the slot of the network cable.
This is the side of the switch, usually the interface of the power line. Of course, the different switches may have different positions, but they are generally on the side.
Method of connecting a switch
This is the front, mainly the indicator light of the switch, etc., here you can determine if your network cable is connected successfully.
Let's start setting up the switch. The power cable connection in the figure below is successful. After the power connection is successful, there will usually be a light in the pope and the front. Next, let's connect the network cable. First, connect the external broadband cable to one of the interfaces of the switch, and then connect the switch to your computer with the network cable. During the connection process, you can check the front indicator light. The connection is successful.
To resolve, we need to set up a host and fix the IP address, such as 192.168.0.1 as shown below.
If the IP address of one of your computers is as shown above, the IP of the other computers should also be set on the same network segment, that is, set to 192.169.0.* (* indicates any number below 255.) After setting it up, we test whether it is successful, open the run input "cmd" and then PING command to see if the connection is successful. Method of connecting switches to switch use tutorial
Method of connecting a switch
Next, we will return to the host computer, which is 192.168.0.1, click on the broadband connection in the network connection, right-click --- attribute --- advanced. Then set up the shared network. After setting up, the words “shared†will be displayed after the broadband connection, as shown below. that's it. Method of connecting switches to switch use tutorial
Method of connecting a switch
Finally, the hint, in fact, the way to connect to the switch is very simple, as long as you carefully look at the network equipment manual, you can master the mystery. I hope that users who are new to network home switch equipment can help. How to connect to the switch The switch uses the detailed method of the tutorial and you will master it.
Connecting Terminals,Micro Connecting Terminal,Aluminum Connecting Terminals,Connecting Copper Terminal
Taixing Longyi Terminals Co.,Ltd. , https://www.longyiterminals.com