There have been statistical data showing that up to 60% of PC software will be involved in the installation process, the most common is the bundled installation of other software, and sometimes bundled as many as 4,5.
If it is used as free software, it is not unreasonable to place some bundles properly. Just give the user a clear demonstration of whether or not to install options. After all, this can maximize profits and help bring better products.
However, if you make a roundabout and the user is playing tricks, you will not be in a good position. Recently, some netizens have discovered a full software bundle interface:
"Please do not cancel any additional software that you do not want to install below." There are six versions of the software below, which are checked by default.
After the user sees dumbfounded: If you do not want to be tied, then in the end the hook, or cancel the hook? It's true that you don't ponder for a few times.
This also triggered netizens to discuss:
- To succeed
-1. Please do not use the form of an imperative sentence to express the request of the software. When analyzing the meaning of the action, you can omit it.
2. Do not want to install modified add-on software, does not mean double negative. So: Install the software to tick off the software without removing the hook
- Since "Cancel Unwanted Software Installation" is a double denial, change this to "Check the software to be installed" and return to the familiar world.
- Please check the add-on you do not want to install below
- Basically, the default is tick, you cancel it. By default, no tick.
- Actually, I think this means that even if you cancel or not cancel, I will install it for you.
Male Pin Headers & Min Jumper Series
Mini Jumper:The short-circuit cap is a 1.27mm,2.00mm, 2.54mm 5.08mm circuit sheet metal. As long as it is 2 pins, the short-circuit cap can be used to short it.
What is the function of the short circuit cap? Short circuit cap, I call it short circuit block. For example, if you use a single row of pins, you can use the short circuit block to short circuit the two adjacent pins (that is, to realize the connection on the circuit). For example, if you have a three wire pin, you can use a short circuit block to realize the function of dial switch.
Mini Jumper
ShenZhen Antenk Electronics Co,Ltd , https://www.antenkwire.com