LED Highbay Light Warehouse Lighting 100W LED UFO Highbay Light

200W 150W 100W LED High Bay Light
Industrial UFO Highbay Lighting Lamp IP65 Waterproof 140lm/W  
 
Product Description
 
1. Original EPISTAR LED ,SMD2835 Up to140lm/W
2.  Meanwell driver, 5 years warranty
3. Power: 100w/150w/200w/
4. Equiv. to: 250W/250W-400W/400W-500W/600W/700W/1000W
5. Various beam angles optional: 60°/90°/120°/150°
6. Function: Zigbee dimmable, DALI dimmable, motion sensor, daylight sensor optional
7. Materials: Die cast Aluminum  / Tempered glass (PC lens optional)
8. Installation method: Loop & Hook hanging / Wall mount / Surface mount / Rack mount
9. Angle for flexible bracket : 30°, 60°, 90°, 120°, 150°, 180°
10. Ideal mounting height: 8-15 m
11. Certification: SAA ,C-Tick,CE, Rohs ,TUV
Specifications:   

Features
1. Meanwell driver + Nichia chips + Unique design / Private tooling heat sink
2. Unique design UFO shape, lighter and smaller, no reflector, saving much freight cost
3. Compact Design, no assembly, easy installation, saving local labour cost
4. Modular design, easily replace the driver
5. Wide aluminum plate design, heat dissipation fast and evenly
6. SMD LEDs are on Large diameter PCB, so the heating from each SMD can be conducted soon and fully,
which guaranteed a low lumen decay and long life
7. All stainless screws prevent bad situation 
Pictures of 100W 150W industrial led high bay light 
Products Comparison







Installation of  Nichia LED High Bay Light
Hook installation steps: 
1. Cut off power before operation.
2. Knowing the inside diameter of the luminaires then Choose suitable hook for the luminaires.
3. Fix the hook before installation and make the it can bear over 3 times weight of the lamp
4. Connect the lamp with hook and make it is safe.
5. Connect the power wire:Brown,"L",connect to LIVE; Blue, "N",connect to NEUTRAL; Lime-green,connect to EARTH/GROUND 
6. Light up the luminaires!
Bracket installation steps: 
1. Cut off power before installation.
2. Measure the hole size on the holder,choose suitable screw.
3. Fix the screw at the place where luminaires will be installed and it should can bear over 3 times the weight of the luminaires
4. Screw up the screws at both sides of holder, then connect the hold hole with screws, tighten it up.
5. Connect the power wire:Brown,"L",connect to LIVE; Blue, "N",connect to NEUTRAL; Lime-green,connect to EARTH/GROUND   
6. Light up the luminaires !  
Attention
Lamp must be vertical suspension and the supporter should can bear at least 3 times weight of the lamp.  
Application
1. factories, industrial production workshop, warehouse;
2. gym, stadiums, golf courses,
3. commercial establishments, overpasses, outdoor advertising board, landmarks;
4. stage, yard, garden, lawn, park, plaza;
5. supermarket, shopping mall, exhibition hall;
6. ships, airports, subways, gas station, the train station, highway toll station, dock 
7. factory, office, meeting room, conference hall, storeroom, etc. 
Packaging & Shipping
Packaging: carton for strong protection
Shipping   : 3-5 for samples, 5-15 for all items, DHL UPS EMS others are available.
 
 

200W 150W 100W LED High Bay Light
Industrial UFO Highbay Lighting Lamp IP65 Waterproof 140lm/W  
 
Product Description
 
1. Original EPISTAR LED ,SMD2835 Up to140lm/W
2.  Meanwell driver, 5 years warranty
3. Power: 100w/150w/200w/
4. Equiv. to: 250W/250W-400W/400W-500W/600W/700W/1000W
5. Various beam angles optional: 60°/90°/120°/150°
6. Function: Zigbee dimmable, DALI dimmable, motion sensor, daylight sensor optional
7. Materials: Die cast Aluminum  / Tempered glass (PC lens optional)
8. Installation method: Loop & Hook hanging / Wall mount / Surface mount / Rack mount
9. Angle for flexible bracket : 30°, 60°, 90°, 120°, 150°, 180°
10. Ideal mounting height: 8-15 m
11. Certification: SAA ,C-Tick,CE, Rohs ,TUV
Specifications:   

Features
1. Meanwell driver + Nichia chips + Unique design / Private tooling heat sink
2. Unique design UFO shape, lighter and smaller, no reflector, saving much freight cost
3. Compact Design, no assembly, easy installation, saving local labour cost
4. Modular design, easily replace the driver
5. Wide aluminum plate design, heat dissipation fast and evenly
6. SMD LEDs are on Large diameter PCB, so the heating from each SMD can be conducted soon and fully,
which guaranteed a low lumen decay and long life
7. All stainless screws prevent bad situation 
Pictures of 100W 150W industrial led high bay light 
Products Comparison







Installation of  Nichia LED High Bay Light
Hook installation steps: 
1. Cut off power before operation.
2. Knowing the inside diameter of the luminaires then Choose suitable hook for the luminaires.
3. Fix the hook before installation and make the it can bear over 3 times weight of the lamp
4. Connect the lamp with hook and make it is safe.
5. Connect the power wire:Brown,"L",connect to LIVE; Blue, "N",connect to NEUTRAL; Lime-green,connect to EARTH/GROUND 
6. Light up the luminaires!
Bracket installation steps: 
1. Cut off power before installation.
2. Measure the hole size on the holder,choose suitable screw.
3. Fix the screw at the place where luminaires will be installed and it should can bear over 3 times the weight of the luminaires
4. Screw up the screws at both sides of holder, then connect the hold hole with screws, tighten it up.
5. Connect the power wire:Brown,"L",connect to LIVE; Blue, "N",connect to NEUTRAL; Lime-green,connect to EARTH/GROUND   
6. Light up the luminaires !  
Attention
Lamp must be vertical suspension and the supporter should can bear at least 3 times weight of the lamp.  
Application
1. factories, industrial production workshop, warehouse;
2. gym, stadiums, golf courses,
3. commercial establishments, overpasses, outdoor advertising board, landmarks;
4. stage, yard, garden, lawn, park, plaza;
5. supermarket, shopping mall, exhibition hall;
6. ships, airports, subways, gas station, the train station, highway toll station, dock 
7. factory, office, meeting room, conference hall, storeroom, etc. 
Packaging & Shipping
Packaging: carton for strong protection
Shipping   : 3-5 for samples, 5-15 for all items, DHL UPS EMS others are available.
 
 

50Mm Dc Spur Gear Motor including 50RS545, 50RS555 and 50RS775 Dc Spur Gear Motor. 50mm DC Spur Gear Motor sometimes is used on welding machines and other devices need high torque. 50mm DC Spur Gear Motor has a better gearbox strength.

50mm dc spur gear motor has 4 kind of stages.
For the 2 stages gearbox, we have 9 gear ratio;
For the 3 stages gearbox, we have 21, 25.5 gear ratios;
For the 4 stages gearbox, we have 50, 60, 72 gear ratios;
For the 5 stages gearbox, we have 118, 141, 170, 205 gear ratios;

Number of stages	2	3	4	5
Reduction Ratio	9	21, 25.5	50, 60, 72	118, 141, 170, 205
Gearbox Length(L) mm	20.4	24.9	29.4	33.9
Breaking Torque(kg f.cm)	25	30	90	90
Gearbox efficiency	81%	72%	65%	59%

50mm DC Spur Gear Motor

50Mm Dc Spur Gear Motor,50Mm Gear Motor,50Mm Dc Gear Motor,50Mm Planetary Gear

SHENZHEN DONGMING MOTOR CO., LTD. , http://www.dmdcmotor.com