Japan, the United States and Europe OLED industry began to test market acceptance

Cree's main products are 46 V LEDs of the models "XT-E HVW" and "XT-L HVW". Unlike the general 3V LEDs, this product corresponds to 100V~110V commercial power, such as the United States, Japan, and Taiwan. Etc., this LED is suitable for small-diameter bulbs such as E11 and E17.

Osram will showcase new LED lighting products for LEDs, which use 450nm and 660nm wavelengths respectively, which is good for plant growth. For example, vegetable leaves are thicker at the venue and can be taken off immediately. The Osram LED uses plant lighting strips, which are mainly composed of 1W LED components.

OLED lighting is different from the previous sample display. The OLED industry began to test the water temperature and sell OLED lighting at the venue. Japanese DN Light ing released two OLED lightings. One OLED panel supplied by Mitsubishi Chemical is large in size and dimmable. The length, width and height are 140×140×5mm, and the price of one panel is 100,000. Yen, DN Light ing is a complete group sales method, namely 6 O LED panels plus power and dimming controllers, a total of 800,000 yen.

The other OLED panel is supplied by Konica Minolta. The panel size is 74×74×1.9mm, and one is 70,000 yen. However, the company also sells the whole group, that is, 3 OLED panels plus power supply price is 300,000 yen. . DN Light ing said that because the current price of O LED lighting is still high, it is only in the test water temperature stage.

Konica Minolta developed OLED lighting manufacturers based on phosphorescent materials earlier in the world. The products are available in length, width and height of 74×74×1.9mm, brightness of 1,000cd/m2, luminous efficiency of 45lm/W and lifetime of 8,000. Hours, color temperature 2,800K, 4 OLED panels plus power supply price of 150,000 yen, the company's 2012 target mainly focuses on the development of OLED lighting color temperature and color rendering.

Japan's glass manufacturer Nippon Electric Glass Co., Ltd. also displays materials for LED and OLED. In terms of LED materials, its phosphor is mainly coated on glass. Unlike traditional coating in plastic materials, the main advantage is that the phosphor has heat resistance. Sex, anti-rotation, water resistance, and is not easy to produce light decay; and the company also displayed ultra-thin, lightweight, flexible glass substrate, thickness of only 40um, mainly used in OLED lighting, to achieve ultra-thin OLED lighting And the purpose of flexibility.

Faced with the emergence of OLED lighting, the LED industry has also developed LED lighting towards thinner. Nissho Gwangbo Co., Ltd. also exhibited LED ceiling lights, emphasizing the advantages of light weight, weighing only 2.4 kg and thickness of only 9.5 mm.

From the perspective of Light ing Japan, overseas LED industry attaches great importance to the Japanese lighting market. Although OLED is still far from LED lighting in terms of efficiency and price, the industry believes that after 2015, O LED lighting will enter the popularization stage, so in 2012 Early layout in the year to attract the attention of end consumers.