Car rear light control circuit diagram
Design a car tail light control circuit. There are three indicator lights on the left and right sides of the car (simulated with light-emitting diodes). When the car is running normally, the indicator lights are all off; when turning right, the three indicator lights on the right side cycle according to the right Sequentially lit (R1 → R1R2 → R1R2R3 → all off → R1) time interval 0.5S (using a 2HZ square wave source); when turning left, the three indicators on the left light up in the order of the left cycle (L1 → L1L2 → L1L2L3 → All off → L1); when temporary braking or detecting whether the tail lights are normal, all the lights are on at the same time (R1R2R3 L1L2L3 lights up); when the car goes backward, all the tail lights are cycled on; when the car is driving at night The last lamp of is always on.
Tin Spray Pcb,Tin Spraying Circuit Board,Multilayer Tin Sprayed Circuit Board,Pcb Spray Tin Board
Shenzheng Weifu Circuit Technology Co.Ld , https://www.viafoem.com