The CS35L00 is a 2.7 W high efficiency Hybrid Class-D audio amplifier with low idle current consumpTIon and a selectable gain.
The CS35L00 features an advanced closed-loop architecture to provide 0.02% THD+N at 1 W and -75 dB PSRR at 217 Hz.
A flexible Hybrid Class-D output stage offers four modes of operaTIon: Standard Class-D (SD) mode offers full audio bandwidth and high audio performance; Hybrid Class-D (HD) mode offers a substanTIal reducTIon in idle power consumption with an integrated Mode-H controller; Reduced Frequency Class-D (FSD) mode reduces the output switching frequency, producing lower electromagnetic interference (EMI); and Reduced Frequency Hybrid Class-D (FHD) mode produces both the lower idle power consumption of HD mode and The reduced EMI benefits of FSD mode.
Requiring minimal external components and PCB space, the CS35L00 is available in a 3.0 mm x 3.0 mm, 10-pin DFN package in Commercial grade (-10°C to +70°C).
Main features of CS35L00:
Filterless Hybrid Class-D Architecture
– <1 mA Quiescent Current
– 1 x 2.7 W into 4 ohm (10% THD+N)
– 1 x 2.1 W into 4ohm (1% THD+N)
– 1 x 1.6 W into 8 ohm (10% THD+N)
– 1 x 1.3 W into 8 ohm (1% THD+N)
ï€
Advanced Delta-Sigma ï€ Closed-loop Modulation
– 98 dB Signal-to-Noise Ratio (A-Weighted)
– 0.02% THD+N @ 1 W (SD & HD Mode)ï´
Integrated Protection and Automatic Recovery for Output Short-circuit and Thermal Overload
Pin-compatible 9-ball WLCSP family for easy upgrade path
– CS35L01: +6 dB default Gain
CS35L03: +12 dB default Gain
Pop and Click Suppression
CS35L00 main application:
Mobile Phones
Laptops/Netbooks
Portable Navigation Devices
Active Speakers
Portable Gaming
figure 1. CS35L00 block diagram
figure 2. CS35L00 SD and FSD mode typical connection block diagram
image 3. CS35L00 HD and FHD mode typical connection block diagram
Note: 3. The value of the capacitance connected to the LFILT+ net should not exceed 4.7uF. Presence of a capacitance above 4.7uF will prevent proper HD and FHD operation.
2.7 W x 4 CS35L00 Amplifier Demo Board
The CDB35L00-X4 demonstrates the CS35L00 high-efficiency Hybrid Class-D audio amplifier. This demonstration board implements a four-channel, quad amplifier system that delivers 2.7 W per full-bridge channel into 4-ohm loads using a single +5 V supply .Differential audio inputs can easily be connected through the J10, J20, J30, and J40 headers. If desired, the gain can be adjusted through the optional input resistors.Component landings are available for an optional EMI output filter.
The CDB35L00-X4 can be configured to evaluate the four operational modes and two gain settings of the CS35L00 amplifier. Mode, Gain, and Shutdown control is available through the S1 switch. Hybrid control is vailable through the R13, R23, R33, and R43 Resistors.
Figure 4. Outline drawing of the 2.7 W x 4 CS35L00 amplifier demo board
Main features:
Contains 4 CS35L00 Hybrid Class-D Amplifiers
Selectable +6 dB or +12 dB Gain
Selectable Operational Modes
Device Shutdown Control
Delivers 2.7 W/Ch into 4ohm at 10 % THD+N
Delivers 1.6 W/Ch into 8 ohm at 10 % THD+N
Differential Mono Analog Inputs for each CS35L00 Amplifier
Demonstrates Recommended 4-Layer Layout and Grounding Arrangements
– Optional Output Filter Connections
– Optional Gain Adjustment Resistors
Powered by Single +2.5-5.5 V Power Supply
Figure 5. CDB35L00-X4 Amplifier Demo Board Diagram
Figure 6. CDB35L00-X4 Amplifier Demo Board Circuit Diagram
CDB35L00-X4 Amplifier Demo Board Bill of Materials (BOM):
Lithium batteries are primary batteries that have lithium as an anode,mainly including lithium-metal batteries,lithium-ion batteries and li-polymer batteries.however,the lithium-ion batteries and li-polymer batteries which have widespread application in every field of life has solved many problems for human beings ,firstly,as commonly used lithium battery ,li-ion battery has some advantage as :
1.The energy ratio is higher. With high storage energy density, it has reached 460-600wh /kg, about 6-7 times that of lead-acid batteries.
2.The working life is longer, it can reach more than 6 years, and the battery with lithium ferrous phosphate as the positive electrode and charged with 1C DOD has a record of using it 10,000 times.
Secondly ,the advantage for li-polymer batteries as :
1.No battery leakage problem, the battery does not contain liquid electrolyte since it uses colloidal solid
2.The battery can be designed in many shapes
3.It will have twice the capacity of a lithium-ion battery of the same size
Lithium Battery,Lithium Battery Pack,Rechargeable Polymer Lithium Battery,Lithium Ion Battery 12V
YFJ TECHNOLOGY (HK) CO.,LIMITED , http://www.yfjpower.com